Enabling & Disabling Deep Freeze
February 16, 2007 at 2:42 am 57 comments
Work Operation
After successfully “logging on” the Boot Control dialog box will appear.
Boot Control
You can choose from three different “Next Boot” options. The default next boot, Boot Frozen, will reboot with Deep Freeze frozen (enabled). This option would normally be used only after selecting the Boot Thawed option. “The Boot Thawed on next” option is used to allow the computer to boot a specified number of times in the Thawed state (disabled). The Boot Thawed option sets the computer to boot continuously with Deep Freeze disabled.
Caution: Selecting the Boot Thawed option leaves Deep Freeze continuously disabled. To re-enable Deep Freeze (in the Frozen mode) you must Logon, as above, and select the control option, Boot Frozen, and then reboot the computer. Deep Freeze is controlled on the local workstation through the Boot Control dialog box which has the Boot Control and Advanced Tabs. On this dialog box you can select if Deep Freeze will be in a thawed or frozen state after your next restart. By selecting the “Boot Thawed on next ‘n‘ restarts” option you can set Deep Freeze to re-enable itself after a specified number of restarts. If you are using a One Time Password that is only valid for one restart you will be unable to change this value beyond three restarts.
After clicking OK and restarting the computer, Deep Freeze will be in either the thawed or frozen state depending on the option selected.
NOTE: If using One Time Passwords the option to select multiple restarts will only be available for 1 to 3 restarts
Change Password
If a pre-configured password has been set with the “Allow changes” checkbox selected the Password Tab will appear. Changes to the password can be made in the Logon box by selecting the “Password” tab, entering and then confirming the new password.
StartUp Thawed at Logon
Logon Advanced Tab
Clicking on the Advanced Tab will bring up the dialog box with the Boot Control, Password and Advanced Tabs. If the “Enable Frozen/Thaw choice at boot time” is selected, it will permit a user with a valid Deep Freeze password to instantly enter the thawed state on the next computer restart. A new Password Logon box will automatically be displayed during the first startup (bootup) logon. This dialog box will appear after the computer has finished startup and will be appear for 30 seconds. Entering a password at the Deep Freeze Startup Logon box will provide the option of immediately entering a Thawed (Deep Freeze disabled) state without restarting the computer.
Unknown Password
Using the Deep Freeze Administrator, you can generate a special One Time Password (OTP) using the OTP system described on below. In the Standard version you have two choices
1. Boot to a floppy and format the hard drive.
2. Call Technical Support.
Using ThawSpace
The Workstation may be pre-configured by the Deep Freeze Administrator to have a ThawSpace. ThawSpace is a virtual disk used to save files and programs which will not be affected by Deep Freeze. ThawSpace operates like a normal disk. The ThawSpace appears, by default, as Drive letter T:
Other Software installations, removal or changes
You must disable Deep Freeze to install or remove other software programs or to make changes. Note: Installation of software often requires one or more reboots to complete the installation. Use the Boot Control to allow the computer to reboot with Deep Freeze thawed.
Support
Every effort has been made to design the software for ease of use and to be problem free. However, if you encounter problems or find that you are having difficulty making the software work as intended, please contact our support department as follows;
Email: support@faronics.com
Or mail me at: mailbishwa@gmail.com
Entry filed under: Enabling & Disabling Deep Freeze.
57 Comments Add your own
Leave a reply to mohammed fouda Cancel reply
Trackback this post | Subscribe to the comments via RSS Feed
Welcome to Bishwa's Zone 
1.
Idowu | July 5, 2007 at 3:31 pm
I really enjoy every word written on your webpage. And I want you to keep on to the nice job doing. But I have been having a problem long time ago with my deep freeze just because I forget the password to diable it and I dont wanna Format the system in order to avoid lossing the vital information I am having on it.
2.
song | July 6, 2007 at 9:14 am
i just installed the deep freeze and im still exploring the new software… by the way i just have one question…
i en-abled the deep freeze on the specified drive which is my partition drive E: now the software works good and its now protected… if I want to modify or update some application on my deep freezed drive E: , do i just select the option “BOOT thawed” ? to temporay disabled the freeze? and en-abled it again after updating my application.
3.
Alex | February 17, 2011 at 3:18 pm
i just installed the deep freeze and im still exploring the new software… by the way i just have one question…
i en-abled the deep freeze on the specified drive which is my partition drive E: now the software works good and its now protected… if I want to modify or update some application on my deep freezed drive E: , do i just select the option “BOOT thawed” ? to temporay disabled the freeze? and en-abled it again after updating my application.
4.
wissam | August 28, 2007 at 11:24 am
i forget deepfreeze 5 password to remove it or stop
5.
wissam | August 28, 2007 at 11:25 am
what i do pleas
6.
Hamdan | November 14, 2007 at 7:26 am
plz i want to remove the deep freeze software from my computer
plz help
7.
farid | January 9, 2008 at 11:01 pm
i forget deepfreeze password to remove it or stop .please what can i do?
8.
erwin andugo | January 15, 2008 at 8:10 am
i installed the deep freeze, then when i tried to disable the deep freeze program it ask a password where in fact i did not assigned any password on it. it was a built in password which i do not know. how would i disable it. please help me..
9.
Loyksie | January 19, 2008 at 2:43 pm
I install deepfeezed on my Desktop PC, fits i enjoy it, very time i try to change my mode from thawed to frozen mode but after several changes made, the deepfeezed now suddenly dont accept my password, and lock my PC to frozen mode, what shall i do, pls. help me, i cant save my every day work on hard drive now, and i dont want to loose my save documents, PLS. HELP ME.
10.
kurtishi | February 20, 2008 at 8:43 pm
haj shkoni ne pichk te nenes kit se skishi dir kurnise
11.
Sunil Rawal | March 31, 2008 at 1:02 pm
I have installed the software and have enabled it.
but now i forgot how to remove it from the thawed state. So please help me regarding this. I could not access anything with my Pc.
so help me regarding this problem.
12.
Yogesh | April 1, 2008 at 6:10 pm
i installed the deep freeze, then when i tried to disable the deep freeze program it ask a password where in fact i did not assigned any password on it. it was a built in password which i do not know. how would i disable it. please help me..
13.
janmark Virtudez | April 5, 2008 at 5:33 am
i forgot password in deep freeze please help me how to uninstall without reformat
14.
Esther | July 1, 2008 at 9:39 am
i want to remove deep freeze software from my computer, please help me. thanks
15.
Esther | July 1, 2008 at 9:41 am
how to remove deep freeze program from my computer?
16.
tbh | July 3, 2008 at 8:56 am
To remove deep freeze, you should have made it run in a thawn mode, then you run th same installer,,,,,it automatically will bring up the uninstall feature if it was installed.
17.
tbh | July 3, 2008 at 9:14 am
dear asker,
if you want to put deep freeze in a thawned mode, hold the shift button and double click the deep freeze icon in the system tray, after that it will ask for a password, if you didn’t assign a password for it just press ok and leave the field blanck, then you can choose “boot thawned” whichafter you can follow the previous comment of mine.
18.
dfs | July 9, 2008 at 9:16 am
asdffsda
19.
LSVC | July 9, 2008 at 9:17 am
I have had the same problem,,,,but thanks tbh for your help.
20.
lovepassword | July 12, 2008 at 6:50 pm
How to remove deep freeze program from my computer?
DF 5 : Replace file : Persi 0.sys in drive C with the same file.
DF 6 : Replace file : $Persi0.sys in C with the same file.
Install DF in another compie. Set Password. Get file Persi.sys or $Persi0.sys. Uses Linux or WinXP Prof recovery consol to copy this file.
Replace Persi0.sys or $persi0.sys in protected compie with new file. Use your new password to access DF configuration.
See You . Hi hi hi…I love you everybody.
Lovepassword say peace. Ngobrol Ngalor ngidul….-
lovepassword.blogspot.com/2008/07/
mengatasi-lupa-password-deepfreeze.html
21.
harry | July 18, 2008 at 6:17 pm
i forgot my deep0freez password
pleas help
22.
SimplyU | July 23, 2008 at 8:20 am
I Got Deep Freeze Pro Adminitrator, It can generate OTP Password on Deep Freeze Pro v.5. And also can ceate Deep Freeze Program that you can modify to freeze a drive what u like, create a single or multiple password, enable thawned Maintenance Schedule and more..
23.
SimplyU | July 23, 2008 at 8:30 am
Who’s anyone get a copy just add me on my friendster:
blindspot.yousuck@yahoo.com =P
heheheh!!!!!!!…..
24.
skillar | August 1, 2008 at 7:33 pm
I tried installing the deepfreez application on my PC,it assumed a successful state; i.e.,it installed to a state and restarted the PC,but when i tried to call it up since it wasn’t displaced on the taskbar with the Ctrl+Alt+Shift+F6 it will not come up.And whenever i tried uninstalling it from where the setup file is, it lunches and asks me to disable deepfreez before performing the uninstallation task.I have a Kerpasky antivirus installed on my PC. But i would like to know what other command or means however to call up this application(deepfreez) on my pc,so I can disable it, so I can Password it.
Thanks.
Skillar.
25.
skillar | August 1, 2008 at 7:37 pm
I tried installing the deepfreez application on my PC,it assumed a successful state; i.e.,it installed to a state and restarted the PC,but when i tried to call it up since it wasn’t displayed on the taskbar to which effect i could use the Ctrl+shift+double click i had to use the Ctrl+Alt+Shift+F6 but it will not come up.And whenever i tried uninstalling it from where the setup file is, it lunches and asks me to disable deepfreez before performing the uninstallation task.I have a Kerpasky antivirus installed on my PC. But i would like to know what other command or means however to call up this application(deepfreez) on my pc,so I can disable it, so I can Password it.
Thanks.
Skillar.
26.
mohammed fouda | August 21, 2008 at 5:47 pm
i forget my deepfreeze pasword
27.
gogi | October 2, 2008 at 8:12 pm
I just want to disable deep freeze in my computer and remove it, but I forgot te password………
28.
dr.j | January 31, 2009 at 1:15 pm
all u idiots who say they forget password
u are idiots…
u should all reformat.
unfreeze your brain 1st before installing a software that u didnt read the instructions nor understand its function.
29.
Addas N.J | June 16, 2009 at 10:34 am
whenever i tried uninstalling deep freeze from where the setup file is, it lunches and asks me to disable deepfreez before performing the uninstallation task. would like to know what other command or means however to call up this application(deepfreez) on my pc,so I can disable it, so I can Password it.
30.
bkal | July 18, 2009 at 7:03 am
i want to uninstalled deep freeze 5. but i forgeet my pasword.
wat should i do to uninstall without formating???
31.
Kailash Choudhary | August 16, 2009 at 4:45 pm
I have installed the deepfreez application on my PC,it assumed a successful state; i.e.,it installed to a state and restarted the PC,but when i tried to call it up since it wasn’t displayed on the taskbar to which effect i could use the Ctrl+shift+double click i had to use the Ctrl+Alt+Shift+F6 but it will not come up.And whenever i tried uninstalling it from where the setup file is, it lunches and asks me to disable deepfreez before performing the uninstallation task.But i would like to know what other command or means however to call up this application(deepfreez) on my pc,so I can disable it, and want to uninstall it, for loading other software on pc
32.
al masri | September 4, 2009 at 11:20 am
actually i want to now how can i let my pc update without disable deepfreeze…..is it posible??? i mean i dont want to freeze windows update and antivirus……how thats posible??? please some one tell me……thnks you…..
33.
online stock trading advice | January 11, 2010 at 1:31 pm
Hey, I read a lot of blogs on a daily basis and for the most part, people lack substance but, I just wanted to make a quick comment to say GREAT blog!…..I”ll be checking in on a regularly now….Keep up the good work! 🙂
I’m Out! 🙂
34.
Rakib | July 28, 2010 at 5:39 am
How can I boot my computer in Thawed mode?
35.
foster | October 11, 2010 at 7:01 pm
i will like to disable my deep freeze 5 so i can change the password for my handy cafe software program but i have forgotten the password for deep freeze 5. can you help me disable it please?
36.
deepfreeze | January 3, 2011 at 6:58 am
i have a different problem my deepfreeze is stock on thawed state even if i change it in frozen state and reboot it comes back to thawed state..any idea?
37.
Aamer Sohail | February 22, 2011 at 10:16 am
plz guide me how to un install deepfreezer
38.
hemusky16 | February 28, 2011 at 1:08 pm
i downloaded deep freeze a month ago, bt now i can’t see the icon nor the folder faronics on my pc. i tried to find it using regedit. there is faronics running program on my pc. it shows thaed bt the current state of my pc is frozen. i can’t disable it or deltete it …. waht should i do? deep freeze v6.30.021.1926 stdevaluation.exe file name…
39.
rob | January 23, 2013 at 4:37 pm
do you know the answer in your question bcouz i have the same
problem in deep freeze like you
40.
Jin | April 11, 2011 at 11:29 pm
is there a some what kind of a blind spot of deep freeze that has not been freeze even if it is Freeze state…? please reply..i need to know…please…..
41.
Clark | April 24, 2012 at 2:55 pm
what should i do? i cant activate my deep freeze .
42.
kyle | July 8, 2012 at 8:19 am
what can i do..to activate my deep freeze…. i need your help
43.
thor21 | November 20, 2012 at 10:12 am
First you should read aBouT deepfreeze before installing it, it is useful but if you dont know how to handle this kind of software, it is dangerous!
44.
http://lebsocial.com/index.php?do=/profile-5123/info | December 20, 2012 at 1:23 am
Heya, I am blogger like you, and was wondering, since Googles Panda Update, my website gets not anywhere found anymore :
( But when i looked for Enabling & Disabling Deep Freeze Welcome to Bishwas Zone your
website was around the 1st page. Want to reveal any tips
with me? I personally use only DuckDuckGo as search
engine due to the fact Google screwed virtually all up.
DuckDuckGo is a lot like Google before they chose to prefer only the massive monster sites!
45.
Big boobed Ladies | February 3, 2013 at 7:21 pm
Thats somewhat Offtopic, but i assumed you may give me an advice.
With regards to registering and hosting a domain name, I’m not sure what I must do. A. Must I register and host at the same place? Or B. Should I register my domain name with one company and host it with another? I would would rather do A, but therein lies my problem. I want to register my domain name with GoDaddy, since I like their prices. Nevertheless, I’d rather not host my site with them.
What would be your choice?
46.
Cow Titties | February 6, 2013 at 9:06 pm
Have you ever considered about adding a little bit more than just
your articles? I mean, what you say is fundamental and all.
Nevertheless imagine if you added some great photos or videos
to give your posts more, “pop”! Your content is excellent but with pics
and videos, this website could definitely be one of the very best
in its field. Wonderful blog!
47.
Boutique Reception Girls | February 8, 2013 at 11:16 am
I own a new tai-chi studio in the East. Believe it or not,
I do not possess a website yet. The problem is I’m not certain whether to choose Blogger or WordPress. I know that I would like far more of a weblog feel than a web site feel, if that tends to make any sense. I would like to be able to update my site with blog posts. Would you be capable of give a couple of advantages and disadvantages for going with either Blogger or Live journal? I actually need to come to a selection relatively quickly on this , because it doesn’t make sense for
me to own this studio without having a web page. It would be kind if you could give
me some advice. Please write to: thurman_salcido@yahoo.
com if you have some spare time. Thx, and by the
way great blog, i need my blog to be like yours one day!
48.
Lee | February 9, 2013 at 1:00 pm
I’m not sure why but this website is loading very slow for me. Is anyone else having this issue or is it a issue on my end? I’ll
check back later on and see if the problem still exists.
49.
Boris | July 13, 2013 at 9:33 am
Hello there. I was considering adding a website link back to your site since both of our web
sites are based mostly around the same niche.
Would you prefer I link to you using your site address: http:
//bishwaraj.wordpress.com/2007/02/16/enabling-disabling-deep-freeze/
or website title: Enabling & Disabling Deep Freeze | Welcome to Bishwa’s Zone. Be sure to let me know at your earliest convenience. Cheers
50.
Deanna | August 3, 2013 at 1:39 am
It’s a shame you don’t have a donate button! I’d certainly donate to this superb blog! I suppose for now i’ll settle for bookmarking and adding your RSS feed
to my Google account. I look forward to new updates and will share this blog with my Facebook group.
Talk soon!
51.
Christmas Time Babes | August 3, 2013 at 11:01 am
I’m curious which blogging platform you’re running? I’m new to running a blog and have been thinking about using the Hubpages platform. Do you think this is a good platform to start with? I would be extremely grateful if I could ask you some questions through e-mail so I can learn a somewhat more prior to getting started. When you have some free time, please get in touch with me at: margherita_villalobos@gmail.com. Thank you
52.
brasil.tv | August 3, 2013 at 1:16 pm
Gday. I was considering adding a website link
back to your blog since both of our sites are based mostly around the same niche.
Would you prefer I link to you using your site address:
https://bishwaraj.wordpress.com/2007/02/16/enabling-disabling-deep-freeze/ or web site title:
Enabling & Disabling Deep Freeze | Welcome to Bishwa’s Zone. Please make sure to let me know at your earliest convenience. Thankyou
53.
Barney | August 9, 2013 at 4:40 am
Hello, I think your website might be having browser compatibility issues.
When I look at your blog in Chrome, it looks fine but when opening
in Internet Explorer, it has some overlapping.
I just wanted to give you a quick heads up! Other then that, fantastic blog!
54.
Nathaniel | October 2, 2013 at 7:21 pm
Having read this I thought it was extremely enlightening. I appreciate you spending some time and effort to put this article together. I once again find myself spending a lot of time both reading and commenting. But so what, it was still worth it!
55.
Evelyn | October 11, 2013 at 7:29 pm
After looking over a few of the articles on your website, I honestly appreciate your way of blogging. I book-marked it to my bookmark site list and will be checking back in the near future. Please visit my web site as well and let me know how you feel.
56.
Kate | October 15, 2018 at 9:53 am
I’m Kate, girl, bisexual. I want to identify a confederate without complexes. If I’m interested in you – Add me
p.s. my sobriquet – katekitten
57.
softorporgo | November 7, 2018 at 3:30 am
По сути перевод на операционную платформу Windows 10-ку на PC или ноутбуке (нетбуке) может быть вызван разными обстоятельствами. А это http://win10soft.ru/4-eset-nod32.html%5Dnod32 windows 10 видал?
как вариант, такого рода перевод на Виндовс “десятку” проходит в частности, если был приобретен абсолютно новый ПК либо ноутбук.